Advertisement
STEP 5
STELLARVUE
STELLARVUE
SFF7-25
FIELD FLATTENER
Continue to thread the field flattener until it is snug and flush
against the focuser. The T-ring or additional extensions may now
be attached to the end of the field flattener to accomodate your
DSLR or CCD camera.
WARNING: LOOKING AT THE SUN CAN CAUSE SERIOUS EyE INjURy AND BLIND-
NESS. NEVER POINT A TELESCOPE AT OR NEAR THE SUN. VIEWING THE SUN
WITHOUT A PROPER SOLAR FILTER MAy RESULT IN BLINDNESS, AS WELL AS
DAMAGE TO THE INSTRUMENT. NEVER ALLOW CHILDREN TO USE BINOCULARS
OR TELESCOPES DURING THE DAyLIGHT HOURS, UNLESS THEy ARE SUPER-
STELLARVUE
VISED By AN ADULT WHO UNDERSTANDS THE DANGER OF POINTING ANy OPTI-
STELLARVUE
CAL INSTRUMENT IN THE GENERAL DIRECTION OF THE SUN.
11820 KEMPER ROAD, AUBURN, CA 95603 U. S. A
WWW.STELLARVUE.COM
PHONE (530) 823-7796, FAX (530) 823-8121
3.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Stellarvue SFF7-25
Summary of Contents for Stellarvue SFF7-25
- Page 1 STEP 5 STELLARVUE STELLARVUE SFF7-25 FIELD FLATTENER Continue to thread the field flattener until it is snug and flush against the focuser. The T-ring or additional extensions may now be attached to the end of the field flattener to accomodate your DSLR or CCD camera.
- Page 2 STEP 1 STEP 3 Locate the 2” adapter on the rear of the telescope. When completely unthreaded, set aside 2” adapter for future use. STEP 2 STEP 4 Unthread the 2” adapter by unscrewing Align the threads of the field flattener with the counter-clockwise.
Need help?
Do you have a question about the SFF7-25 and is the answer not in the manual?
Questions and answers