Switching on the dishwasher
Turn on the tap if it is turned off.
Open the door.
Press the button for at least two
seconds.
Selecting a programme
Use the programme selector button
to select the programme required.
Selecting programme options (if
required)
You can select and deselect the options
using the appropriate buttons and the
display.
The option selected will remain active
for that particular programme until the
setting is changed.
Press the button for the option you
want.
The indicator light for the relevant
button will light up.
Activating FlexiTimer (if
required)
Press the button.
Use the arrow buttons to set the
required function and confirm your
selection with the OK button.
Use the arrow buttons to set the
time and confirm with OK.
Starting the programme
Start the programme by closing the
door.
All manuals and user guides at all-guides.com
At the end of a programme -
Switching off
At the end of a programme, the In-
operation indicator light will be visible
flashing slowly with the door shut. The
buzzer might also be sounding.
The programme has finished when
Finished
door has opened slightly (if applicable).
The drying fan may continue to run for
a few minutes at the end of the
programme.
Open the door fully so that the door
Switch the dishwasher off with the
Unloading the dishwasher
Dishes tend to break and chip more
easily when they are hot. Allow the
dishes to cool until they are
comfortable enough to handle before
unloading them.
appears in the display and the
catch rail retracts again.
button.
If you have deactivated the
automatic door opening function but
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully.
Otherwise steam from the
dishwasher could damage the edge
of the worktop because the fan is no
longer running.