T-PH02
Phone holder for sports
All information described in this user guide is based
on the test standard of Takeway. Sorry for the
inconvenience caused if there are any errors. The
design and specifications of this product are
subject to change without notice.
Copyrighted: All Rights Reserved
Manufacturer
TEL:+886-4-24065031
info@takeway.tw
www.takeway.tw
The phone holder for sports T-PH02 is the accessory of Takeway T1
Clampod. It is suitable for smartphone at 4~5.7 inches which can be used in
a dynamical environment, even there is strong shaking it will not fall off.
1
After loosening the bracket screw knob
of the sport mobile phone holder, move
the mounting bracket to one side. Push
the mounting plate slightly outward and
insert phone by sliding the phone from
the top to the bottom. Move the
mounting bracket back over the phone
and press down until the mount is
completely snug with the phone.
Tighten the bracket screw knob and
shake lightly to make sure the phone is
secured tightly.
** Quick-release clip is nondetachable **
USER
GUIDE
EN 2014/12
T-PH02
Phone holder for sports
Before using the product for the first time, please
read through the user guide.
Please use this product correctly after fully
understanding the content of the user guide.
Knob of
bracket
USER
GUIDE
mounting bracket