Mains Power Connection; Main Power Switch; Pair Button; Bluetooth Connection - Pro-Ject Audio Systems BT Box S2 HD Instructions For Use

Mains power connection

Connect the low voltage plug from the power supply to the Power 5VDC socket before connecting the power
supply to the mains.

Main power switch

The push button on the left side of the front panel turns the unit on or back into standby. The blue LED above
the power button indicates the status of the unit.
The blue LED is blinking fast for about 2 seconds during the startup period.

Pair button

The Pair push button activates pairing mode. The blue LED above the Pair button indicates the status of the unit:
Slow blinking: waiting for devices (no Bluetooth device connected)
Fast blinking: pairing mode is activated
Illuminated: Bluetooth device connected, ready to play

Bluetooth connection

Press the Pair button - the LED above the button begins blinking fast.
In pairing mode, the device becomes visible for scanning and available for connections.
Pairing mode will automatically turn off when the pairing is successful or after 60 seconds.
Pairing with Android devices
Open Settings and tap on Bluetooth. Turn on Bluetooth and tap on Scan. Searched devices will show up.
Tap on BT_Box_S2 HD and confirm presented pairing code on your Android device.
Confirm "Pairing" on your Android device. When paired with BT_Box_S2 HD, your Android device will show
"Connected to media Audio". Now you can play music from your Android device over Bluetooth to
BT_Box_S2 HD.
Bluetooth pairing with Apple ® devices
Tap on Settings, tap on Bluetooth, turn on Bluetooth. Your device will automatically start searching for
available devices. Tap on BT_Box_S2 HD and confirm presented pairing code on your Apple device. Now
you can play music from your Apple device over Bluetooth to BT_Box_S2 HD.
3
© Pro-Ject Audio Systems · Pro-Ject BT Box S2 HD · Revision 2021.3.4