LED LIGHTING
The front panel lighting (7) is controlled by tapping
on the top of the camera (6). The lighting is active
when the camera is connected to a PC via cable
and also in the program that will be used for video
streaming (ie. the camera is actively used). Tap the
touch-pad (6) to activate the panel lighting, tap again
to increase the light intensity (there are a total of 3
light intensities available), and tap again (fourth time)
to turn the light off.
Notice: if the camera is only connected to a PC, the
LED lighting is not active. It will not be activated until
the camera is used in a streaming program.
INSTALLATION
1
2
13