Advertisement
Quick Links
Please read these instructions carefully and keep in a safe place for future reference.
Safety
: This is a mains voltage powered product and should only installed by a qualified electrician.
Diagram:
Specification:
Voltage
Power factor
Wattage
10W
Lumen
Lamp type
CRI
Material
Beam angle
Products size
103x155x23
(mm)
Colour Temp
Work Temp
Protection
Housing colour
LED Floodlight Instructions
20W
121x163x23
Warm white: 2700-3000K, Cool White: 4000-4500K, Daylight: 6000-6500K
AC180-240V
>0.9
30W
>80LM/W
Epistar SMD 2835
>80
Aluminium Alloy
180 °
160x193x26
-20℃----50℃
IP65
Black, White
50W
206x216x31
270x260x33
100W
Advertisement
Summary of Contents for Core Products CP-10WFLCW-AC
- Page 1 LED Floodlight Instructions Please read these instructions carefully and keep in a safe place for future reference. Safety : This is a mains voltage powered product and should only installed by a qualified electrician. Diagram: Specification: Voltage AC180-240V Power factor >0.9 Wattage 100W...
- Page 2 PIR Specification: Power Source:220-240VAC Power Frequency:50/60Hz Rated load: MAX. 100W resistive load / MAX.10W Inductive load Detection Range: 90° Detection Distance: 6-10m (adjustable)； Time Delay: min: 10±5sec, Max:8±2min. (adjustable) Ambient Light: 2-2000lux. (adjustable) Detection Motion Speed:0.6-1.5m/s Working Temperature: -10℃--+40℃ Installation Height: 1-3m Installation: 1-Remove the bracket pulling out the two bolts on both sides.
- Page 3 The LED Floodlight comes with a connection port which can accommodate a plug-in PIR or Photocell. These are sold separately and can be purchased via your local retailer. Testing PIR: Turn the SENS dial anti-clockwise to the maximum point, turn the TIME dial clockwise to the minimum point, turn the LUX dial ...
- Page 4 PLEASE NOTE: WHEN TESTING IN DAYLIGHT, PLEASE TURN THE LUX DIAL TO THE (SUN) POSITION, OTHERWISE THE SENSOR WILL NOT WORK! Maintenance: Before carrying out maintenance, please allow the product to cool down. The electric protection class of this product is” I” so it needs to be earthed. This product is IP65, so no internal cleaning is required.
Need help?
Do you have a question about the CP-10WFLCW-AC and is the answer not in the manual?
Questions and answers