Summary of Contents for Rhino-Tuff HD-4470
- Page 1 RhinoTuff HD-4470 Comb Opener Setup & Operator Manual Provided By http://www.MyBinding.com http://www.MyBindingBlog.com...
- Page 2 HD-4470 Setup & Operator Manual Issue 0 Oct, 05 PDI Part # 944700 Performance Design Inc. 2350 East Braniff St. Boise Idaho 83716 Page 1...
- Page 3 HD-4470 Comb Opener Module The Heavy Duty HD-4470 Comb Opener has been designed to open comb spines up to 2” (51mm). The HD-4470 easily allows you to add or remove pages for quick changes. The HD-4470 Comb Opener has an adjustable ring opener control for exact book placement.
- Page 4 Your HD-4470 Comb Opener came partially assembled without feet mounted. In order to attach the HD-4470 Comb Opener to the feet you need to locate the accessory box. Inside find the screws and Allen wrench (1), and the feet (2), and assemble them as show.
- Page 5 Illustration 3.1 Illustration 3.2 See illustration 3.3. Place your HD-4470 onto your punch and secure with the 4 three winged knobs (1) as shown. Attach the handle (2) with the brass bolt, nylock-nut, and washer provided in the accessory kit.
- Page 6 (1) and (3) with the Allen wrench provided. Illustration 4.4 See illustration 4.5. Locate 2 three winged knobs in the accessories kit to secure the HD-4470 to your punch. Attach the handle (2) with the brass bolt, nylock-nut, and washer provided in the accessory kit.
- Page 7 5) Determine the correct comb size. Use the table below to determine the correct comb size for the book thickness. You can insert more sheets into the comb, but it may affect the appearance of your book. Covers are not included with the number of sheets column.
- Page 8 b) Setting the comb opener stop. The comb opener stop knob is located on the rear of the comb opener. Set the comb opener stop by turning the knob counter clockwise so the combs open far enough to place a book on the fingers of the comb, but not to far so the comb is lying flat with no room for the book.
Need help?
Do you have a question about the HD-4470 and is the answer not in the manual?
Questions and answers