Advertisement
The Hotwater suit is tested to and meets EN 14225-3:2017
Notified Body No. 2452
Vojenský technický ústav, s.p.
odštěpný závod VTÚPV
Víta Nejedlého 691
682 01 Vyškov
Czech Republic
The EU Declaration of Conformity can be found on the Northern Diver (Int) Ltd product
pages in the download section, please visit our website :
www.ndiver-commercial.com/evolution-8-hotwater-suit
Made from 4mm compressed neoprene that's shrink resistant, the density of the neoprene
is increased through the compression process giving the Evo8 Hotwater Suit its massively
improved strength. The Northern Diver Hotwater Suit is manufactured from materials which
provide the same maximum comfort whilst ensuring excellent resistance to wear and tear.
As with all our diving products, performing proper care and maintenance, as outlined in this
manual, will ensure an extended product life.
Features:
Moulded and overprinted shoulder, knee and elbow pads
Easy to maintain valves
Hook and loop fastening to secure wrists and the zip
Side zip on ankle to taper the suit fit
2x Reinforced bellows pockets
Blind stitched, internally reinforced and sealed seams
We've developed our suit to be:
Low friction
- allowing the suit to slide easily whilst being put on and taken off and also during diving.
Lightweight
Low bulk
Ease of movement
Ease of adjustment of the hot water supply
The Northern Diver Hotwater Suit is compatible with all Commercial Diving hot water
systems. The suit is compatible with all Commercial harnesses and recovery vests.
(Although we'd recommend you use our Northern Diver R-Vest or Safety Harness).
If sizing allows, the Evo8 can be used by male or female divers.
Designed to be used as a commercial hot water suit, the Evo8 Hotwater Suit was
developed to attach to a hot water delivery system. The suit is designed to be used in an
environmental temperature range of 2°C (35.6°F) to 20°C (68°F)
The size of the suit is printed on the left chest above the name label as well inside on the
Hotwater Suit's information panel. When choosing a suit, please select one that's closest
to the wearers body dimensions - height, chest and C-Floor. For more guidance on this,
please check our Hotwater Suit sizing guide. Provision for urination is not required as the
suit is not a drysuit.
Contact Northern Diver
3
| +44 (0) 1257 25 44 44 | info@ndiver.com | www.ndiver.com
Advertisement
