Advertisement
What's in the box?
•
Development kit hardware platform – 256 transducer array board, control board and frame structure
•
Leap Motion
®
Camera Module and USB cable
•
Development kit Micro USB 2.0 cable
•
Multi-regional (US, UK and EU) power supply
•
This guide with Compliance, Health & Safety and Warranty statements
•
Sample array cover materials
Control board overview
Power switch
1
Power jack
2
Micro USB
3
4
Power OK LED
Reset button
5
Serial number label
6
7
Array transmitting LED
Getting started — Connecting the hardware
1.
Remove the Stratos Explore Development Kit from the anti-static bag.
2. Connect the Leap Motion
camera module to your computer with the supplied cable.
®
3. Connect the control board to the computer using the Micro USB 2.0 cable.
4. Connect the included power supply to the control board power connector.
5. Connect the power supply to the mains power source after all the other connectors have been inserted.
6. Set the power switch to on.
Leap Motion
®
Camera Module
2
Array
3
5
4
Transformer
Advertisement
