Product Features; Foot Assembly - Finlux FCH-1820 BG Manual

5.
The power cord on this appliance must not be replaced by the user. If the cord is damaged or requires replacement, contact
qualified personnel only.
6.
Avoid the hot contact, checking that the cord is not placed in front of the hot air outlet grille.
7.
Do not use near bathtubs, showers or basins (minimum distance 1 metre).
8.
Use in an upright position.
9.
Keep the suction grille clean.
10.
Do not use the appliance immediately below a fixed power outlet.
WARNING
In order to avoid overheating, do not cover the heater.
CAUTION
1.
Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and
vulnerable people are present.
2.
The heater must not be located immediately below a socket-outlet.
3.
Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
4.
Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised.
5.
Keep the appliance and its cord out of reach for the children less than 8 years.
6.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order
to avoid a hazard.
7.
Children of less than 3 years should be kept away unless continuously supervised.
8.
Children aged from 3 years and less than 8 years shall only switch on/off the appliance which provided that it has been placed or
installed in its intended normal operating position, and they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
9.
Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user
maintenance.

PRODUCT FEATURES

1.
Aluminum shell, high thermal efficiency
2.
heating element: quick heating with higher energy savings.
3.
LCD display function information .
4.
Timer from 1 to 24 hours to turn the convector heater on or off at the desired time.
5.
Digital display with automatic room temperature display.
6.
Free standing with tripod.

FOOT ASSEMBLY

Before using the heater，the feet（supplied separately in the cartoon），must be fitted to the unit.
These are to be attached to the base of the heater using the 4 self-tapping screws provided,
taking care to ensure that they are located correctly in the bottom ends of the heater side
moldings.