Advertisement
Quick Links
Advertisement
Summary of Contents for Televic Lingua T
- Page 1 Lingua Transmitter QUICK START GUIDE...
-
Page 2: Update Your System
Lingua T Quick User Guide Update Your System Before updating the system, make sure you have the latest update on your Lingua T. Ensure you have download the latest .tuf file from http://updates.televic-conference.com. Next, power on the Lingua T and go to the webpage: Surf to http://192.168.0.140... - Page 3 Lingua T Quick User Guide Click on “Update Version”: Click on “Load file” and select your .tuf file:...
- Page 4 Lingua T Quick User Guide Click on “Start Update”:...
- Page 5 Lingua T Quick User Guide The update should not take longer than 5 minutes. Once it is finished, press “Finish Update”. The Lingua T will reboot automatically:...
-
Page 6: Channel Configuration
Lingua T Quick User Guide 2. Channel configuration Click on “Menu” and subsequently on “Audio”: Enter the channel language codes (2 letters, free to choose) for each required channel. This should be the ISO-639-1 language codes in case Aladdin receivers are used. The floor should be abbreviated as “FL”:... - Page 7 2. Contact Televic Conference (email: cocon-license@TELEVIC.com) with this MAC address and your purchase order number. You will receive a mail with the license file in ZIP format. 3. Unzip the file and import the XML file in the Lingua T website by clicking on the “Upload license” button.
- Page 8 Lingua T Quick User Guide 4. Verify the maximum number of audio channels. This should match the number of the purchased license.
- Page 9 Lingua T Quick User Guide 3. Setting Delay Line Compensation for the Radiators Click on “Menu” and subsequently on “Radiator”: In order to set the delay line compensation for the radiators manually, upload the configuration file with the correct settings by clicking on “Import configuration” and uploading a .tdc file.
- Page 10 The maximum number of radiators allowed on one branch (in cascade) is 20. This means a maximum of 80 radiators can be used on a single Lingua T. Edit this file according to your setup, taking into account this specific structure, and upload...
- Page 11 The upload could take up to 30 seconds. Now your system should be ready to be used. Route the Dante™ channels with the Dante™ Controller software to the Lingua T Dante™ interface (default IP address: 169.254.0.1) to insert the audio.
Need help?
Do you have a question about the Lingua T and is the answer not in the manual?
Questions and answers