LockTech ACCU READER CHRY8 Quick Start Manual page 2

TIPS& SUGGESTIONS
1) Always clean the keyway thoroughly before starting.
2) Keep the AccuReader key parallel as possible to the lock when reading wafers.
3) Watch the demonstration video online at:
4) While keeping the AccuReader straight in the lock with one hand, use your other hand to insert the depth
slide with a very slight upward pressure on the slide itself. This will ensure the tip of the slide is traveling
along the bottom of the track as intended.
5) Always start with the deepest possible depth slide and always stop and move to the next position as soon
as a "YES" reading is taken. You only progress to a shallower depth slide (in order) when a "NO" reading is
taken.
Please email us for any corrections or additions at
Typical Wafer Orientation for a Chrysler 8 cut door/trunk
1 2 3
X
X
www.accureader.com
4 5 6
X
X X
info@accureader.com
7 8
X
X
rev. 09-04-10