Advertisement
SWITCH Motor Vibration Strength Adjustment
Press and hold the L+ZL+R+ZR button for 3 seconds for adjustment,
there are 3 levels of strength, 25%-50%-100% Default to 50% strength.
After setting, the corresponding level lamp is always on for 1 second,
and the motor vibrates for 1 second.
Six-Axis Sensor Adjustment
Press the "B" + "-"+ HOME button for power on, two sets of lights
ash each other, press again "+" button for adjustment.
Reset Function
When the controller function is abnormal or crashes, you can short
press the Pairing button to reset the controller.
Controller Reference Current
ELECTRICAL SPECIFICATIONS
7
www.PyleUSA.com
Advertisement
