Instructions For Transferring Suction And Βlowing Air To And From The Bucks; Maintenance; Maintenance-Cleaning - Primula OCTOPUS Instruction Manual

5.3 Instructions for transferring Suction and Blowing air to and from the bucks
A) If you want to interchange the suction/blowing air from the ironing surface to the bucks
that are situated on the back side of the ironing table, you can pull the buck over the
ironing surface. The suction/blowing air automatically will be interchanged from the
ironing surface to the bucks and vice versa.
B) If you want to interchange the suction/blowing air from the ironing surface to the bucks
that are situated in the front side of the ironing table, you can push the lever No 08 (see
picture 5) which is located under the working surface. The suction/blowing air
automatically will be interchanged from the ironing surface to the bucks and vice versa.
For each individual buck that you want to use, you must align the arrows (see picture 5) of the
each buck with the arrow of the buck holder so that the suction/blowing function can be
transferred to the chosen buck.
Picture 5: Images for transferring suction/blowing to and from the bucks

6. Maintenance

6.1 Maintenance-Cleaning

Before cleaning/checking/maintaining the ironing table, ensure that it is not connected to any
power supply source and is not warm after usage. The processes of cleaning and maintenance
must be taken place frequently and it is vital for the correct, safe and long-term operation of
the ironing table.
For the correct operation of the ironing table over time you need to:
• Keep the covers of the board and the bucks clean, in order to have high suction and
blowing performance. Wash the blue polyester fabric cover once a month in the
washing machine (30-40°C).
• Replace the covers and the foams frequently for high suction and blowing performance.
• Remove any fuzz by dusting or cleaning the impeller at least 2-3 times a year.
• Clean and lubricate periodically the ball bearing of the swivel arms and the bucks of the
ironing table.
• Clean periodically the inner parts of the ironing table, as well as the circuit board, using
compressed air.
c
8
8
Instruction Manual Octopus