Table of Contents
Advertisement
KATflow 100
6 Maintenance
KATflow flowmeters are maintenance free concerning the flow measurement
functions. Within the scope of periodic inspections, regular inspection for signs of
damage or corrosion is recommended for the transducers, the junction box if
installed, and the flowmeter housing.
6.1 Service/Repair
KATflow flowmeters have been carefully manufactured and tested. If installed and
operated in accordance with the operating instructions, no problems are usually
experienced.
Should you nevertheless need to return a device for inspection or repair, please
!
pay attention to the following points:
●
●
If the device has been operated with toxic, caustic, flammable or water-
!
endangering products, you are kindly requested:
●
●
All manuals and user guides at all-guides.com
Due to statutory regulations on environmental protection and safeguarding the
health and safety of our personnel, the manufacturer may only handle, test and
repair returned devices that have been in contact with products without risk to
personnel and environment.
This means that the manufacturer can only service this device if it is
accompanied by a Customer Return Note (CRN) confirming that the device is
safe to handle.
to check and ensure, if necessary by rinsing or neutralising, that all cavities are
free from such dangerous substances,
to enclose a certificate with the device confirming that is safe to handle and
stating the product used.
6 Maintenance
39
Advertisement
Table of Contents
