Table of Contents
Advertisement
Important Notice
●
Johnson Controls Inc. pursues a policy of continuing improvement in design and performance in its products.
As such, Johnson Controls Inc. reserves the right to make changes at any time without prior notice.
●
Johnson Controls Inc. cannot anticipate every possible circumstance that might involve a potential hazard.
●
This heat pump air conditioning unit is designed for standard air conditioning applications only.
Do not use this unit for anything other than the purposes for which it was intended for.
●
The installer and system specialist must safeguard against leakage in accordance with local pipefi tter and
electrical codes. The following standards may be applicable, if local regulations are not available. International
Organization for Standardization: (ISO 5149 or European Standard, EN 378). No part of this manual may be
reproduced in any way without the expressed written consent of Johnson Controls Inc.
●
This heat pump air conditioning unit is operated and serviced in the United States of America and comes with a full
complement of the appropriate Safety, Danger, and Caution, warnings.
●
If you have questions, please contact your distributor or dealer.
●
This manual provides common descriptions, basic and advanced information to maintain and service this heat
pump air conditioning unit which you operate as well for other models.
●
This manual should be considered as a permanent part of the air conditioning equipment and should remain with
the air conditioning equipment.
Product Inspection upon Arrival
1. Upon receiving this product, inspect it for any damages incurred in transit. Claims for damage, either apparent or
concealed, should be fi led immediately with the shipping company.
2. Check the model number, electrical characteristics (power supply, voltage, and frequency rating), and any
accessories to determine if they agree with the purchase order.
3. The standard utilization for this unit is explained in these instructions. Use of this equipment for purposes other
than what it designed for is not recommended.
4. Please contact your local agent or contractor as any issues involving installation, performance, or maintenance
arise. Liability does not cover defects originating from unauthorized modifi cations performed by a customer without
the written consent of Johnson Controls, Inc. Performing any mechanical alterations on this product without the
consent of the manufacturer renders your warranty null and void.
1. Safety Summary ..............................................................................................................................................3
2. Brand Label ......................................................................................................................................................6
3. Installation Work ..............................................................................................................................................6
4. Electrical Wiring ...............................................................................................................................................8
5. Checking Procedures .......................................................................................................................................8
6. Function Selection and Input/Output Setting from the Controller .....................................................................9
7. Individual Louver Setting ................................................................................................................................21
8. Adjusting Date/Time .......................................................................................................................................22
9. Room Name Registration ...............................................................................................................................22
10. Setting of Main Controller ..............................................................................................................................23
11. Main/Sub Non-display Setting ........................................................................................................................24
12.Setback Trigger Unit .......................................................................................................................................25
13. Operation Mode/Setting Temperature Priority Setting ...................................................................................26
14. Contact Information Registration ...................................................................................................................27
15. Check Menu ...................................................................................................................................................27
2
TABLE OF CONTENTS
P5415484
Advertisement
Table of Contents
