Related Manuals for Variscite VHP-VS8M Heat Sink Kit
Summary of Contents for Variscite VHP-VS8M Heat Sink Kit
- Page 1 V H P - V S 8 M H E A T S I N K VARISCITE LTD VHP-VS8M Heat Sink Kit For: VAR-SOM-MX8M-PLUS, VAR-SOM-MX8M-MINI VAR-SOM-MX8M-NANO VHP-VS8M Data Sheet Rev 1.00, 05/2021 Page, 1 Variscite Ltd.
- Page 2 (including liability to any person by reason of negligence) will be accepted by Variscite Ltd., its subsidiaries or employees for any direct or indirect loss or damage caused by omissions from or inaccuracies in this document.
-
Page 3: Revision History
V H P - V S 8 M H E A T S I N K 1. Revision History Revision Date Notes 1.00 May 04 2021 Initial – Preliminary VHP-VS8M Data Sheet Rev 1.00, 05/2021 Page 3 Variscite Ltd. -
Page 4: Heat Sink Assembly
3.3 Insert the M2 screws from the heat spreader top side. 3.4 Tight the head spreader to the VAR-SOM-MX8M-PLUS/MINI/NANO using the supplied screws. Recommended torque for tightening the screws is ~1in-lb (~0.113N-m). VHP-VS8M Data Sheet Rev 1.00, 05/2021 Page 4 Variscite Ltd. - Page 5 The thermal paste should have similar thermal conductivity as the thermal pad, 6.0 watt/m-k (by JIS R2618 / ASTM D2326 standard). Heat Sink assembly sketch VHP-VS8M Data Sheet Rev 1.00, 05/2021 Page 5 Variscite Ltd.
-
Page 6: Contact Information
V H P - V S 8 M H E A T S I N K 4. Contact Information Headquarters: Variscite Ltd. 4, Hamelacha Street P.O.B 1121 Airport City, 70100 ISRAEL Tel: +972 (9) 9562910 Fax: +972 (9) 9589477 Sales: sales@variscite.com...