Advertisement
Quick Links
Model: 1800US
Product Manual
Thank you for your purchase of the Power Badger product!
The Power Badger was engineered to be rugged, long lasting and easy to use. We are grateful you
have put your trust in our company and chosen to invest your hard-earned money in our product.
Table of Contents:
Page 1 (this page)
Page 2-3: Initial plug-in, setting-up your Badger for the first time
Page 4: Power Badger Operation and Hidden Displays
Page 5-6: General Information
Page 7: Power Badger Term Definitions
Page 8: Device Map Page
Page 9: Device Features
Page 10: Parts List
1
Advertisement
Summary of Contents for BMI Power Badger
- Page 1 Thank you for your purchase of the Power Badger product! The Power Badger was engineered to be rugged, long lasting and easy to use. We are grateful you have put your trust in our company and chosen to invest your hard-earned money in our product.
- Page 2 (and/or after an internal battery change) The first time you plug in your Power Badger you will be prompted to make a few initial settings These settings will be saved (via the Badger’s internal battery) for a period of 4-6 months, so you don’t have to make these setting selections more than once per winter season and you don’t have to set it up outside in...
- Page 3 Set the “Maintain after ready” duration: This selection controls how long the unit maintains your engine in a “ready to start” condition after your selected “Ready Time” has been reached (settable at 0-9 hours). *Example: If you have the “Ready Time” on your Badger set to 6:00am, the “maintain after ready” duration you select (0-9 hours), controls how long your unit will go into “Maintain”...
- Page 4 Mode Selection: Press the “Mode” button, to toggle through the 4 different modes of your Power Badger. Each press of the Mode button will scroll to the next choice. Once the desired choice is displayed, no further action is needed, the device is then in that mode of operation.
-
Page 5: General Information
7). Follow instructions on page 2 for setting-up your user defined settings. Internal Fuse: The Power Badger is equipped with an internal fuse to keep your unit safe in the event of an overload condition. Common causes of an overload condition can be: a). - Page 6 If power is interrupted during operation, once the power returns, the Power Badger is programmed to continue the same mode of operation as it was in when the power failed. If the unit was in “Timed Ready” mode when the power failed, the unit will resume operation to ready the engine for its intended start time, but if the power outage was too long, the unit may not have enough time to fully prepare the engine to start as intended.
- Page 7 Ready Time: “Ready Time” is a user defined setting, defining at what time the Power Badger device will aim to have the engine ready to start. The device will use the (user defined) ready time along with the outside temperature measurements to calculate when to fire the engine heater and for how long.
-
Page 8: Device Map
Device Map 1: Temperature sensor inside protective strainer (light colored to reduce sun heat from affecting readings) 2: Mounting holes on enclosure to screw to wall or vehicle 3: Input power cord strainer 4: Mode button; used to select operational mode of device 5: Set button;... -
Page 9: Device Features
Device Features The Power Badger was carefully engineered to be rugged and long lasting. We want the owners of the Power Badger to know that their unit is well built. We assemble every unit right here in North Carolina, USA, using no- compromise, high quality components that (in many cases) were engineered and produced specifically and exclusively for the patent pending Power Badger product. -
Page 10: Parts List
Parts List Power Badger Model# 1800US Replacement Parts List Part number Description Qty per unit PB1001 Enclosure / Housing PB1002 Bottom / back aluminum cover PB1003 Front membrane / face PB1006 PCBA assembly, w/blue display PB1007 Input power cord / 120v / male... - Page 11 Power Badger™ Limited Warranty Limited Warranty - This limited warranty is expressly limited to Bostic Motors Inc’s products (hereafter referred to as “The Company”) that have been purchased by the original consumer purchaser or for purposes of resale or in the ordinary use by the end-user.
Need help?
Do you have a question about the Power Badger and is the answer not in the manual?
Questions and answers