DVS VR01-085 Installation Instructions

Typical Installation

Cold water supply
Valve*
Non-return valve*
Warranty & Support

Warranty

The Safe Ensuite in Wall Basin is guaranteed for 5 years from
purchase against defective material and assembly.

Support

For technical support please visit our technical pages on our
website at www.dartvalley.co.uk or contact us:
techsupport@dartvalley.co.uk
+44 (0)1803 529021
Head Office
Dart Valley Systems Ltd
Kemmings Close
Long Road
Paignton
Devon
TQ4 7TW
UK
MT04-001 AquariTherm Tap (Manual)
Hot water supply
TMV*
Warm (mixed) water supply
*Not supplied
˜Sold separately
Page 4 Page 8 www.dartvalley.co.uk
Safe Ensuite In Wall Basin
Installation Instructions
VR01-085

Step 1 : Safety first

These instructions relate to the use of the Safe Ensuite in Wall
Basin only, any external or 'add-on' parts will be supplied with
separate instructions.
It is recommended that the electrical part of the installation
be carried out by a qualified electrician in accordance with the
latest electrical regulations. It is also recommended that any
plumbing is carried out by a qualified plumber.
IMPORTANT : Please read these instructions carefully
and follow each stage in order!
The fixing kit supplied is suitable for fixing to IPS panels up to
25mm thick, for brick or concrete walls please see options below:
VR01-006 Fixing kit for 100mm walls
VR01-007 Fixing kit for 150mm walls
VR01-008 Fixing kit for 250mm walls
Each kit includes:
4 x 10mm Steel threads
2 x ½" BSP Brass threads (for sensors)
Dart Valley Systems Ltd | Kemmings Close | Long Road | Paignton | Devon | TQ4 7TW | UK
t +44 (0)1803 529021 | f +44 (0)1803 559016 | techsupport@dartvalley.co.uk | www.dartvalley.co.uk

Step 2 : Parts

VR01-085 (basin)
Waste grid Waste bung 1¼" plastic M10 A11 thread
VR01-032 (x1) VR01-033 (x1) male iron
PP00-210 (x4)
VR00-035 (x1)
Square washer M10 hex nut
PP00-031 (x4) PP00-114 (x4)