Wireless Flash Photography
This chapter describes how to shoot with wireless flash using radio transmission.
See the system map (
shooting.
Caution
Operations described in this chapter are not available when the camera is set to
Basic Zone shooting modes. Set the camera's shooting mode to <
<
> <
Note
The ST-E10 attached to the camera is referred to as a "sender," and other
Speedlites controlled wirelessly are referred to as "receivers."
•
Wireless Flash Photography
•
Wireless Settings
•
ETTL: Fully Automatic Wireless Flash Photography
•
Advanced Shooting with Fully Automatic Wireless Flash
•
Using Multiple Senders
•
ETTL: Wireless Multiple-Flash Photography with Flash Ratio
•
M: Wireless Multiple-Flash Photography with Manual Flash Output
•
Gr: Shooting in a Different Flash Mode for Each Group
•
Clearing Transmitter Settings
•
Test Firing from Receivers
•
Remote Release from Receivers
) for the accessories required for radio transmission wireless flash
> <
> <bulb(
)> (Creative Zone).
17
> <
>