Advertisement
Advertisement
Table of Contents
Related Manuals for NewTechWood Planter Box
Summary of Contents for NewTechWood Planter Box
- Page 1 Planter Box Installation Guide v20191125...
- Page 2 CONTENTS Important Note Planter Box Component for 1x3 Single Layer Installation Multi-layer Installation Planter Box Installation Guide / v20191125...
- Page 3 2kV. Layout Before installing the UltraShield Naturale Planter Box, always make sure that you are installing it on a clean smooth flat surface. The UltraShield Naturale Planter Box CANNOT be installed on places such as dirt, soil, or raised structure.
- Page 4 Planter Box Components for 1x3 IMPORTANT POINTS: • Parts B, C, D will be different depending on the planter box kit model. • Parts D, G quantity will be different depending on the planter box kit model. A - UQ0116...
- Page 5 Single Layer Installation The following installation is for the 1x3 planter box. Other planter boxes will be installed in the same manner, the only difference being the length of the boards. Lay & connect the grids (G-UQ0101) on a flat surface as shown in Diagram 1.
- Page 6 Multi-layer Installation The planter box can be stacked up and installed up to 3 layers. Follow the steps 1-5 in Single Layer Insert 2 plugs into the pre-drilled holes Installation on page 2. in every board to lock the board and post together as shown in Diagram 12.
- Page 7 ©2019 Huidong Meixin Plastic Lumber Products Manufacturing Co., Ltd. ® NewTechWood is a registered trademark of Huidong Meixin Plastic Lumber Products Manufacturing Co., Ltd. To obtain a copy of the most current version of this installation guide, visit us online at...
Need help?
Do you have a question about the Planter Box and is the answer not in the manual?
Questions and answers