Krown KMX-8.2 Operation Manual

Advertisement

KMX-8.2
KMX-12.2
Thank you for purchasing KROWN PA Audio Mixer
Please read this manual thoroughly before making connections and turning on the power.
Following the instructions in this manual will enable you to obtain optimum performance from your
new KROWN PA Audio M ixer.
Please retain this manual for future reference.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KMX-8.2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Krown KMX-8.2

  • Page 1 KMX-8.2 KMX-12.2 Thank you for purchasing KROWN PA Audio Mixer Please read this manual thoroughly before making connections and turning on the power. Following the instructions in this manual will enable you to obtain optimum performance from your new KROWN PA Audio M ixer.
  • Page 2 KMX-8.2/12/2...
  • Page 3 & aesthetically designed side panels. KMX-12.2 offers 12 MIC/LINE Balanced Mono inputs with enhanced headroom. KMX-8.2 offers 8 MIC/LINE Balanced Mono inputs with enhanced headroom. Separate ECHO controls are provided for each channel, and built -in digital effect processor with feedback, delay and level controls.
  • Page 4 L & R outputs of this distributed signal. 9. EFFECT CONTROL For routing the signal to the built-in digital effect processor in desired proportion. 10. CHANNEL FADER This slide volume control adjust the level of pre -amplifier mono signal to panning action. KMX-8.2/12/2...
  • Page 5 The headphone output is used for personal monitoring & its level is not affected by the setting of master control. 12. HEADPHONE CONTROL It is used for controlling the level of stereo signal which is available as headphone output. KMX-8.2/12.2...
  • Page 6 20. The fader signal, after external processing, are fed back to to the mixer through RETURN inputs and mixed with the main L & R outputs. 21. Always use interconnecting cables with appropriate connectors which are suitably wired for proper functioning of the mixer & its peripheral equipments. KMX-8.2/12.2...
  • Page 7 KMX-8.2/12.2...
  • Page 8 Model KMX-8.2 KMX-12.2 8 Channel 12 Channel Number of Input Channel MIC INPUT 2kΩ Balanced/65dB (Impedance/Gain) LINE INPUT 20kΩ Balanced/45dB (Impedance/Gain) <0.08% FREQUENCY RESPONSE 25Hz - 20kHz (+0, -1dB) L/R Line Output EQUALIZATION ±12dB at 100Hz/2kHz/10kHz Bass/Mid/Treble 4 dB prior to true clip...

This manual is also suitable for:

Kmx-12.2

Table of Contents