Table of Contents
Advertisement
RF Exposure
Your phone contains a transmitter and a receiver. When it is ON, it receives and
transmits RF energy. When you communicate with your phone, the system handling
your call controls the power level at which your phone transmits.
Specific Absorption Rate (SAR)
Your mobile device is a radio transmitter and receiver. It is designed not to exceed
the limits for exposure to radio waves recommended by international guidelines.
These guidelines were developed by the independent scientific organisation
ICNIRP and include safety margins designed to assure the protection of all
persons, regardless of age and health.
The guidelines use a unit of measurement known as the Specific Absorption Rate,
or SAR. The SAR limit for mobile devices is 2 W/kg and the highest SAR value for
this device when tested at the ear was
0.506
W/kg*. As mobile devices offer a
range of functions, they can be used in other positions, such as on the body as
described in this user guide**.
As SAR is measured utilising the device's highest transmitting power, the actual
SAR of this device while operating is typically below that indicated above. This is
due to automatic changes to the power level of the device to ensure it only uses the
minimum power required to communicate with the network.
with [EN50360-2001],
*The tests are carried out in accordance
[EN62209-1:2006] and [IEC 62209-2:2008(106/162/CDV)].
** Please see page 3 about body worn operation.
Body worn operation
Important safety information regarding radiofrequency radiation (RF) exposure.
To ensure compliance with RF exposure guidelines the phone must be used with a
minimum of 15 mm separation from the body.
Failure to observe these instructions could result in your RF exposure exceeding the
relevant guideline limits.
3
Advertisement
Table of Contents
