Download Print this page
LAFERT ATE ZONE 2-22 Operating Instructions Manual

LAFERT ATE ZONE 2-22 Operating Instructions Manual

Brushless servo motors

Advertisement

Quick Links

SERVO MOTORS
BRUSHLESS SERVO MOTORS
ATE ZONE 2-22
OPERATING INSTRUCTIONS
3010/21 EN

Advertisement

loading

Summary of Contents for LAFERT ATE ZONE 2-22

  • Page 1 SERVO MOTORS BRUSHLESS SERVO MOTORS ATE ZONE 2-22 OPERATING INSTRUCTIONS 3010/21 EN...
  • Page 2: Installation And Commissioning

    Read these Operating Instructions before performing LIFTING EYEBOLTS transportation, installation, commissioning, maintenance or repair Lift the motors exclusively by the relative lifting eyebolts activities on the industrial motors and generators. provided for this purpose. Do not add loads to the motor. The lifting eyebolts are designed to support only the The instructions contained in this manual cannot provide all the weight of the motor.
  • Page 3 COMBINED MEASUREMENT OF AXIAL AND RADIAL ALIGNMENT NOTE ON EXPLOSION PROTECTION • (FIG. 4) When the installation is finished, IP test shall be Figure 4 illustrates how to combine the two measurements in a done. Closing the connector, use 1.8 Nm of relatively easy way.
  • Page 4 RESOLVER CONNECTOR The drive shall be a sinusoidal three phases pulse with modulation device with a bus voltage ≤ 750 VDC a switching frequency 8 - 16 kHz, maximum rising voltage/time in compliance with IEC60034-25 curve A (cable length included). With different drive characteristics the motor performances can vary.
  • Page 5 MOTOR PERFORMANCES INSTRUCTIONS FOR STORAGE NOTE ON EXPLOSION PROTECTION Prolonged electric motor storage (ex. spare motors) must be carried • Motor performances comply with IEC60034-1 out the following precautions. once the motor is coupled to a metal flange not insulated without additional external...
  • Page 6 WARNING FOR THE CORRECT DISPOSAL OF THE MOTORS AT The above symbol, applied to the equipment or its packaging, means THE END OF THEIR LIFE TIME that at the end of its lifetime the motors need to be disposed separately from the other waste materials. The users must dispose their unused motors on behalf of the national According to the art.
  • Page 7 Lafert Servo Motors S.p.A. E. Majorana, 2/A I-30020 Noventa di Piave (Venice), Italy Tel. +39 / 0421 572 211 Fax +39 / 0421 225 858 info.servomotors@lafert.com www.lafert.com...