for High power and heat it for exactly one minute.
3. Stir the water again and read the temperature of the beaker.
(recorded as T2).
4. The normal temperature rise at High power position for each
model is as shown in table.
TABLE (1L-1min.test)
RATED OUTPUT
800W(IEC60705)
5. EXPLODED VIEW AND PARTS LIST
6. PARTS LIST
NOTE:
1. When ordering replacement part(s), please use part number(s)
shown in this part list.
Do not use description of the part.
2. Important safety notice:
Components identified by mark have special characteristics
important for safety.
When replacing any of these components, use only manufacture's
TEMPERATURE RISE
Min. 8°C
10