Product The Lonsdor KH100+ full-featured key mate and related materials are only used for normal vehicle maintenance, diagnosis and testing, and should not be used for illegal activities. If you use our products to violate laws and regulations, the company does not assume any legal responsibility.
KH100+ SAFETY INSTRUCTION Before use this product, please read this instruction carefully to know how to use it properly. (1) Do not hit, throw, acupuncture the product, and avoid falling, squeezing and bending it. (2) Do not use this product in damp environment such as bathroom, and avoid it being soaked or rinsed with liquid.
Then input the code to submit login. ④ Account login succeeded, it will take 5 seconds to bind the device. ⑤ Successful registration, enter the system. In addition, users who have already registered Lonsdor’s product can directly choose [registered user] to activate account.
KH100+ 2.4 Device components Name Notes Antenna To induce simulated chip and detect ignition coil Induction coil To identify, copy, generate key chip or remote, etc. Display screen 2.8-inch color screen, resolution: 320X480 Port 1 USB-B port Port 2 Dedicated port for remote s connector Long press 3s to boot.
KH100+ 2.5 Function introduction When complete the registration activation, it enters below menu interface: 2.5.1 Identify Copy Enter this menu, follow system prompts to operate (as shown).
KH100+ 2.5.2 Access card cloning Enter this menu, you can identify and copy IC card, and generate garage key as well. Follow the prompts to operate(as shown below). Identify ID card Identify IC card 2.5.3 Simulate Chip Put KH100+’s antenna at the ignition switch(as shown), choose the corresponding chip type to simulate.
KH100+ Put below types of chip into the induction slot(as shown), choose the corresponding chip to operate according to the prompts. This device supports below chip types: ①4D ②46 ③48 ④T5 ⑤7935 ⑥8A ⑦4C ⑧Chip conversion Note: some chip data will be covered and locked. 2.5.5 Generate Remote Enter [Generate key]->[Generate remote], choose the corresponding vehicle type to generate remote control(as shown) according to different regions.
KH100+ Search smart induction area Connect remote key with remote connector, Put KH100+’s antenna close to the pre-determined position. If inductive signal is identified, the device will continuously make sounds, please check if the position is right(as shown below). ②Detect IMMO Connect remote key with remote connector, Put KH100+’s antenna close to key identification coil, and use key to turn ignition ON.
Page 27
P1: no signal FT smart key For Toyota or Lexus smart keys from Lonsdor, you can perform the following functional operations: read version info, modify key value, unlock and upgrade program and etc. Put in the smart key, click [select] to operate.
KH100+ Unlock Toyota smart key/detect Toyota key status Put in the smart key, click OK to operate. Charge key For a chargeable key with battery, you can perform this function. Put in the key, click [OK] to operate. 2.6 Upgrade Enter settings menu, and connect the device to network, then choose [check for updates], one-click online upgrade.
KH100+ 3.0 After-sales service (1) Our company will provide you with excellent after-sales service and warranty service within agreed time. (2) The warranty period lasts 12 months from device activation date. (3) Once the product is sold, the return and refund will not be accepted if there is no quality problem.
Page 30
(11) Please keep the warranty card properly, and fill in the card when returning your device for repair, so that we can deal with the relevant work procedures(the warranty card attached to the end of the manual). (12) Service Hours: Monday to Saturday: 9:00-12:00 13:30-18:00; legal holidays excluded. Email: service@lonsdor.com...
KH100+ Product Warranty Card Customer name: ___________________________________________ ( Mr/Ms ) Phone No.: __________________________________________________________ Customer address: ___________________________________________________ _____________________________________________________________________ Device model: ______________________________________________________ Serial No.: _________________________________________________________ Returned items (details): ___________________________________________ ___________________________________________________________________ Problem description in details: _____________________________________ _______________________________________________________________________ ______________________________________________________________________ Sending date:_____________________ (Note: our company reserves the final interpretation right for the above terms.)