Advertisement
3. OPERATION INSTRUCTIONS
3.1.
ATTACHING LAMP TO BONNET.
3.1.1. Lift the locking latch (fig.1A) on each end of the mounting bracket and extend hooks (fig.1B) on either side to fit
the width of the bonnet.
3.1.2. offer the mounting bracket up to the underside of the raised bonnet.
3.1.3. slide the hooks in so they grip the bonnet from underneath and press the locking lever down to lock the hooks
in position.
3.1.4. removal is a reversal of the previous procedure.
3.1.5. You may also remove the mounting bracket from the lamp, and use the light hanging vertically from the hook at
the top of the lamp.
3.1.6. When fixing lamp back onto mounting bracket ensure the clips are gripping the black rubber surround at
each end of the tube and not the tube itself.
fig.1
3.1.7. to use the lamp, plug the transformer plug into the mains socket to turn the light on.
3.1.8. When finished, disconnect the transformer plug from the mains supply and store the lamp in a safe, dry and
childproof location.
4. MAINTENANCE
Keep lamp clean and check for damage before every use. If damage is observed remove from use until unit is
repaired.
NOTE! There are no user serviceable parts on this lamp. For repair please return to your nearest Sealey authorised
dealer.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
A
B
Sole UK Distributor, Sealey Group,
Kempson Way, suffolk Business Park,
Bury st. Edmunds, suffolk,
IP32 7Ar
Original Language Version
www.sealey.co.uk
01284 757500
Web
01284 703534
sales@sealey.co.uk
email
LED95230V
Issue: 2 - 29/03/10
Advertisement
