Table of Contents
Summary of Contents for Gatekeeper Systems ITSS
- Page 1 Intelligent Temperature Sensing Systems (ITSS) Desktop Mount Installation Guide Intelligent Temperature Sensing System Desktop Mount Installation Guide Document Ref. No. : DN3330 Version No. : 1.0.0 Page 1 of 9 Document Date : October 2020...
-
Page 2: Table Of Contents
Desktop Mount Installation Guide TABLE OF CONTENTS INTRODUCTION ............................3 ..............3 ELCOME TO NTELLIGENT EMPERATURE ENSING YSTEM ITSS DESKTOP MOUNT INSTALLATION ....................4 ................................. 4 ESKTOP OUNT 2.1.1 Assembly of Desktop Mount ......................... 4 ................................7 IRING ROCEDURE ............................7... -
Page 3: Introduction
Desktop Mount Installation Guide 1 Introduction 1.1 Welcome to Your New Intelligent Temperature Sensing System Congratulations on the purchase of your new Gatekeeper Systems Intelligent Temperature Sensing System (ITSS). Gatekeeper’s Health Monitoring Panel is a standalone Intelligent Temperature Sensing System that detects temperature. -
Page 4: Itss Desktop Mount Installation
Intelligent Temperature Sensing Systems (ITSS) Desktop Mount Installation Guide 2 ITSS Desktop Mount Installation This section provides instructions on the installation and setup of ITSS on a desktop mount at a fixed-site location. 2.1 Desktop Mount The panel can be mounted on the desktop mount on an angle that captures people standing up to 1 meter away from the panel. - Page 5 Intelligent Temperature Sensing Systems (ITSS) Desktop Mount Installation Guide 3) Loosen thumbscrew, lift panel mount assembly up and remove from pole. Thumbscrew Fig 2 Panel Mount Assembly 4) Place panel on flat clean surface. Line up the holes on the bracket assembly with the holes on the back of the panel.
- Page 6 Intelligent Temperature Sensing Systems (ITSS) Desktop Mount Installation Guide 5) Line up panel with desired slot. Insert tabs into slots and secure using the thumbscrew. Fig 4 Attach panel to the slot Page 6 of 9...
-
Page 7: Wiring Procedure
Place the Temperature Panel to its final location and plug in the wall power supply. Use an extension cord if required. Refer to ITSS user guide or reach to our technical support for any further information you may require. 2.3 Installation Requirements As part of installation best practices, it is recommended to mount the device at a fixed-site where there is environmental control (i.e. -
Page 8: Customer Limited Warranty
Systems either verbally, in writing, by instructions written on the product or in the Gatekeeper Systems Installation and Operating Manual. This warranty does not apply to any damage to the Gatekeeper Systems product that is the Advance replacements will be issued for the first 90 days from the date of result of improper maintenance or to any Gatekeeper Systems’... -
Page 9: Contact Information
Abbotsford BC V2T 6H1 Tel - 1 604 864 6187 Fax - 1 604 864 8490 Toll Free - 1 888 666 4833 GATEKEEPER SYSTEMS USA INC. 7-200 Rittenhouse Circle Bristol, PA 19007 Tel - 1 604 864 6187 Fax - 1 604 864 8490 Toll Free - 1 888 666 4833 SALES &...