Advertisement
4. Troubleshooting
4-5-2. Service Function Specifications
Checking the Code Version
1. Check the MCU code version and checksum after entering SVC Mode.
2. Entering SVC Mode
- Menu --> Magic Bright --> Note PC
- Hold down the Enter button for five (5) seconds.
- The SVC Function OSD is displayed.
- To exit the SVC Function, turn the pow er off.
3. Safe Mode
- When the input signal is higher than the supported frequency of the product, safe mode gives users some time (one
minute) to change the video card settings to the Recommended Mode settings.
Service Mode (Moving around)
1. Each time the up button is pressed, menu is selected.
4-12
All manuals and user guides at all-guides.com
Micom version
Micom checksum
Panel information
Select the Auto Auto option
Select the PixelShift option.
Country
Scaler Vender
Advertisement
