GCTek PondKeeper System Instructions

Getting to know your
PondKeeper
Taking a few minutes to get to know the different compo-
nents of your PondKeeper System will assure that you are
using it to it's maximum potential.
Multiport
Media
Backwash valve
Agitator
Water pump
(Various)
2 speed shown
ZapTek2
Stainless
Steel UV
Equipment
Pad
If you need any help
feel free to give us a
call 866.712.7007
Congratulations
novice. Each of the components was carefully chosen to provide you with
years of dependable service and clear water for you and your pond.
with each of the components and what part they play in the PLUS system.
differ slightly from the various components shown, but assembly of the
system is basically the same.
System
Filter Unions
PondKeeper
Filter
Water Drain
ZapTek UV
Sight glass
PondKeeper
System Instructions
on your new
Your filter system was designed to go together easily even for a
Take a few minutes to look at this manual and familiarize yourself
Due to the custom nature of these systems your components may
You have with this system the following components:
PondKeeper
Dynamo 2 speed Water pump (can be one of a variety)
ZapTek2
Assembly of your
PondKeeper
Step 1: Start by laying the Pad on level ground where you want to lo-
Note: Locating the equipment as close as possible or below the surface grade(water
level) of the pond will result in best results. Distance from the pond is not as critical as
the distance above the surface grade.
PondKeeper System
bio-mechanical filter
Ultraviolet light
Plumbing parts
Media Agitator
Equipment pad
System
cate the equipment.
(over)