VibraPEP Breathe Easy Quick Start

QUICK START: Instructions for Use
1
Visually
inspect the
device for
damage
2
Insert the
Mouthpiece
into the
Therapy
Selector
3
Inhale deeply
through your
nose, then
hold your
breath for 2
to 3 seconds.
4
Exhale through
the VibraPEP
for 3 to 4
times longer
than your
inhalation .
5
Repeat this process for 15
breaths or as instructed by your
healthcare provider.
6
Perform 2 to 3 "huff coughs" to
clear the airway.
These are abbreviated instructions for use. Always read the full instructions that are
packaged with the VibraPEP OPEP Therapy System or available at VibraPEP.com
Breathe Easy
www.vibrapep.com
VibraPEP
Oscillatory PEP
Therapy System
(OPEP)
For Use with Nebulizer
A
Assemble the nebulizer as
described in the nebulizer
supplied Instructions For
Use
B
Connect the
Valved Tee
Adapter
2-3 sec.
and
mouthpiece
† The Valve Tee Adapter is an optional accessory
C
Assemble
Nebulizer
to the
3-4x
22mm
connector
of the
VibraPEP
D
Turn on the nebulizer and
inhale the medication
through the mouthpiece
and exhale through the
VibraPEP as in step 4
†
part # 12218
with Nebulizer
LIT-0197 Rev. A 2020-10-09