Motorola KEY 3000 User Manual page 98

KVL 3000 User's Guide
Share All Keys
5-4
In this scenario, all traffic and shadow keys, as
well as group maps (if present) and the
KMC sourced indexes
transferred from the source KVL to the target
KVL.
Important! In order to perform a Share All
procedure, the target KVL must support the
same algorithms (e.g., DES and DVI XL, or DES
and DVP XL) as the source KVL.
Example: The source KVL is equipped with
DES and DVP XL, and there is at least one key
defined for each algorithm. The target KVL must
also be equipped with DES and DVP XL.
1. With both KVLs turned on and connected
via the transfer cable, navigate to and
select SHARE in the Main Menu. The
following screen will appear:
SHARE ALL
2. Press to select XFER. The
flash on both KVLs, and both displays will
show the progress of the sharing
process, first with traffic keys, then with
shadow keys, group maps, and indexes.
3. When finished, the source KVL emits a
success tone and displays SHARE ALL
SUCCESSFUL (the target KVL shows
SHARE SUCCESSFUL) to indicate a
successful sharing operation.
(if present) are
XFER
will
ASN Operation