Advertisement
Quick Links
P.O. Box 342, Delavan, WI 53115
Phone: 1-800-365-6832
Fax: 1-800-526-3757
E-Mail: flotec@flotecpump.com
Web Site: http://www.flotecwater.com
©2000. PRINTED IN U.S.A.
®
FPPA-9IL
Installation/Operation/Parts
For further operating, installation, or maintenance assistance:
Call 1-800-365-6832
OWNER'S MANUAL
Chlorinator
3752 0900 ASB
FP346 (9/5/00)
Advertisement
Summary of Contents for Flotec FPPA-9IL3
- Page 1 OWNER’S MANUAL Chlorinator ® P.O. Box 342, Delavan, WI 53115 Phone: 1-800-365-6832 Fax: 1-800-526-3757 E-Mail: flotec@flotecpump.com Web Site: http://www.flotecwater.com FPPA-9IL 3752 0900 ASB Installation/Operation/Parts For further operating, installation, or maintenance assistance: Call 1-800-365-6832 FP346 (9/5/00) ©2000. PRINTED IN U.S.A.
-
Page 2: General Safety
2. Use equipment only in a pool or spa installation. 3. Trapped air in system can cause explosion. BE SURE all air is out of system before operating or testing equipment. 1-800-365-6832 For parts or assistance, call Flotec Customer Service at... -
Page 3: Table Of Contents
Retail outlet or to from state to state. FLOTEC as soon as possible after the discovery of any alleged FLOTEC • P.O. Box 342 • Delavan, WI U.S.A. 53115 Phone: 1-800-365-6832 • Fax: 1-800-526-3757 E-Mail: flotec@flotecpump.com •... -
Page 4: Installation
1 to 2 more complete turns with a wrench. DO NOT Plumbing Loop Water Level (Gas Trap) overtighten. Overtightening will strain the joint and can lead to joint/bushing failure. Figure 3 1-800-365-6832 For parts or assistance, call Flotec Customer Service at... -
Page 5: Operation
Trichlor. Therefore, it requires greater move- ment of water over chemical (“scrubbing action”) to achieve the same output as Trichlor. For this reason, the control dial settings will always be higher when using bromine. 1-800-365-6832 For parts or assistance, call Flotec Customer Service at... - Page 6 3 ppm – see your shock manufac- 4. Replace cap and turn pump on. Follow steps 3 turer’s recommendations). through 7 of “Operating Instructions” to determine the proper setting with the new sanitizer. 1-800-365-6832 For parts or assistance, call Flotec Customer Service at...
- Page 7 1. Using needlenose pliers, find the snap ring tail located approximately at the 5:00 o’clock position under the control dial (see Figure 4). P O O L S AN ITI ZER Figure 7 Figure 4 1-800-365-6832 For parts or assistance, call Flotec Customer Service at...
- Page 8 8. Guide the snap ring with a small screwdriver (or other pointed tool) to keep it in the groove in the housing as it is inserted (see Figure 11). Figure 9 Figure 11 1-800-365-6832 For parts or assistance, call Flotec Customer Service at...
-
Page 9: Repair Parts
Control Dial O-Ring Kit 01-22-9450 Control Dial w/Ass’y Kit (Incl. Key No. 7) 01-22-9440 • Danger/Instruction Label • Cap/Control Dial Tool 01-22-8870 • Silicone Lubricant 01-22-9970 Not available separately. • Not illustrated 1-800-365-6832 For parts or assistance, call Flotec Customer Service at...