Lloyd's LC-1330 Quick Manual page 21

10. Chime characteristics
• Sensitivity: -112 dbm
• Frequency: 433 MHz
• Power consumption in standby mode: 10 mW
• Volume: 5 levels (maximum: 100dB / minimum: mute)
11. Installation and setup of the chime
1. Connect the chime to the power supply.
2. Select the melody: this chime has 50 melodies.
3. When the chime is connected, press the "Melody selection"
button repeatedly until you find the tone of your preference.
4. Press the "Volume Select" button to choose the desired
level of modulation.
5. To link the chime to the video doorbell, press and hold the
Volume selection button for 5 seconds until the LED
indicator lights up, then press the "Call button" on the
video doorbell to synchronize.
6. Under the same procedure, you can link the chime to
another video doorbell and/or you can pair two or more
video doo bells to the same chime.
7. If you want the chime to play a different melody for each
video doorbell, be sure to select the desired tone in the
chime before performing the linking process.
8. To unlink the chime from the video doorbell, disconnect it
from the power supply. Before switching it back on, press
and hold the Volume selection button and do not release
it for 5 to 10 seconds even after switching it on. When the
indicator LED lights up, the device will reset to its factory
settings.
NOTE:
• It is recommended to link the chime before setting up your
video doorbell in the app.
• The name that you assign to the device will be the one
that you use for voice commands with Google and Amazon
Alexa assistants.
21