Important safeguards/general cautions are information that can protect the user from safety hazards and also prevent losses Please be sure to read the manual correctly for proper usage ·Please read the manual carefully before installation and utilization. ·This product is made for the US. ·The function and design of the product may be changed for quality improvements.
Technical parameters EBS-01 The direct-coupled water supply system Hip wash and Female wash, common (1-5 phase) Adjust four stages(Off, LoW, Medium, High) Adjust four stages(Off, LoW, Medium, High) Recommendation:15°C-25℃ Be sure to confirm before use. This product is suitable for AC120v/60Hz.
Page 4
2.Press and hold “Stop” and “Hip Cleaning” buttons for more than 3 seconds. (Water pressure, warm air and LED lights will be turned off for five times) After the communication connection is completed, the remote control can be used. MODEL WEIGHT PACKAGE WEIGHT PRODUCT SIZE EBS-01 controller ≈ ≈...
Page 7
Installation method 1. Put the two rubber nuts in the attachment into the mounting hole on the toilet. 2.Align the plastic bottom plate marked with arrow in the fitting with the mounting hole on the toilet flat. 3. placing the metal gasket in two clamping grooves corresponding to the plastic bottom plate.
Page 8
Installation method Remote control installation - Select the appropriate location to install the mounting bracket Controller (a place where the height of the person is satisfied and the water will not easily splash) - After wiping off the dust, tear off the two sides of the the double-sided tape and stick it firmly.
Page 9
Basic method of use When the skin sensor is not in contact, the Sit on the toilet seat operating handle will not start. Sitting on a body cleaner with your legs bent. The trousers or skirt are not fully pulled down. When using child auxiliary seat rings.
Page 10
Basic method of use Choose wash swing function -Wash at the hips,lower body wash,purge process, select the same feature key again will start swinging wash. nozzle moves back and foward,washing more. -Rock wash process,select the same feature key again,to stop the swing wash. Choose energy- saving function -Keys can be lit power indicator.
Page 12
Maintenance and repaier Nozzle cleaning method (nozzle automatic cleaning) in the unseated state, press the nozzle cleaning button, the nozzle back and forth eight times back and forth, automatic cleaning. (manual nozzle cleaning) when the nozzle cleaning button is pressed for 3 seconds, the nozzle will automatically protrude and stay for two minutes.
Need help?
Do you have a question about the EBS-01 and is the answer not in the manual?
Questions and answers