Advertisement
B&G Portable Drinking Fountain
Parts List
Part #
30108901
TP-700 Mold Tank
30110104
Strap
30110106
Siphon Assembly
30110700
Discharge Valve with hose
30112001
F-W703 Cart Assembly
33000422
Pump Assembly
33000274
Parts Kits, Includes Piston
Cup, Gaskets, and Check
Valve. To rebuild pump
assembly.
30110800
Hose Assembly
30111001
Shut-off Assembly
30111800
Plunger Drinking Tip &
Guard
For complete operating instructions,
please see the reverse side of this sheet.
P.O. Box 1190
135 Region South Drive
Jackson, GA 30233
phone: 678-688-5601
website: www.bgequip.com
Description
Model WB-4S
To order parts or if you need further help,
contact your dealer or visit our webiste at
www.bgequip.com
Advertisement
Table of Contents
Summary of Contents for B&G WB-4S
- Page 1 Plunger Drinking Tip & Guard For complete operating instructions, please see the reverse side of this sheet. P.O. Box 1190 Model WB-4S 135 Region South Drive Jackson, GA 30233 To order parts or if you need further help, phone: 678-688-5601 contact your dealer or visit our webiste at website: www.bgequip.com...
- Page 2 Operating Instructions For B&G Portable Water Fountain Model #WB-4S 1. Fill the tank with water approximately 2/3 to 3/4 full. 2. Screw the handle in a clockwise direction, tightening the cap snugly on the collar of the tank. 3. Ten or twelve strokes of the pump will pressurize the unit for operation. Re-Pressurize with a few additional strokes as needed while in use.
Need help?
Do you have a question about the WB-4S and is the answer not in the manual?
Questions and answers