Vestil DTD-24 Instruction Manual

Rev. 7/10/2018
DTD–24 DRUM TIE DOWN
Receiving instructions:
After delivery, remove the packaging from the product. Inspect the product closely to determine
whether it sustained damage during transport. If damage is discovered, record a complete description of
it on the bill of lading. If the product is undamaged, discard the packaging.
NOTE:
The end-user is solely responsible for confirming that product design, use, and maintenance comply
with laws, regulations, codes, and mandatory standards applied where the product is used.
Replacement Parts and Technical Assistance:
If you have questions that are not addressed in these instructions and to order replacement parts,
labels, and accessories, call (260) 665-7586 and ask for the Service and Parts Department. The
department can also be contacted online at http://www.vestilmfg.com/parts_info.htm.
Signal Words......................................................................................................................... 2
Hazards Of Improper Use......................................................................................................... 2
Using The Product................................................................................................................... 2
Inspections And Maintenance................................................................................................... 3
Labeling Diagram............... ............................................................................................................ 3
Limited Warranty.................................................................................................................... 4
Copyright 2018 Vestil Manufacturing Corp.
Vestil Manufacturing Corp.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Web: www.vestilmfg.com
INSTRUCTION MANUAL
Table of Contents
Fax: (260) 665-1339
e-mail:
Page 1 of 4
MANUAL
info@vestil.com