Westfalia S-810 Instruction Manual page 3

Using
Remove the protecting lid out of the ink pad.
Slide the ink pad with the ink upright into the slot.
Arrange your text with the tweezers on
the text plate. Up to 4 lines of text, 17
letters per line are possible. Place the
text mirror-inverted on the plate.
Press the stamp with the hand lightly down and
press both, sidewise locking buttons in order to lock
the plate support in a vertical position.
Hold the arranged text plate with dump and index
finger on the rear handle and slide the text plate ver-
tically on the plate support, until the plate locks audi-
ble.
To unlock the latching, press the stamp lightly down.
In order to correct the text, press the stamp com-
pletely down and arrest with both, sidewise locking
buttons.
If desired, remove the above transparent lid and insert one label
with the arranged text.
Scope of Delivery:
1 Stamp Pad, Replacement No. S-823-7
2 Text Plates, Size: 47 x 18 mm
256 characters and current symbols, Size 3/16"
Design protected by copyright
Instruction Manual
Self-Inking Stamp Kit S-810
Article No. 52 63 35
1 Housing
1 Tweezers
© Westfalia 04/07