Advertisement
Available languages
Available languages
OPERATION
Begin by setting parking brake on vehicle and blocking all wheels. Make sure
vehicle is raised to desired height and is stable. Extend the post to height
close to the support member. Check the load locking and release handle to
insure that the dog portion has engaged a tooth on the post. Make sure both
jack stands are at an equal height and will support the load equally when the
lifting device is removed. Place jack stands carefully under support points
specified by vehicle manufacturer. Do not crawl under vehicle when placing
or removing stands! SLOWLY lower the load onto the jack stands and check
to insure the load is located on the center portion of the post saddle. Check
the load for stability. If the load is NOT located on the center of the post
saddle, or if the load is not stable, re-lift the load and reposition the jack
stands to insure proper loading before continuing with work or repairs.
ASSEMBLY
Remove both stands and posts from box. Insert posts into stand and use pin
to hold.
OWNER/USER RESPONSIBILITY
The owner and/or user must have a thorough understanding of the
manufacturer's operating instructions and warnings before using the Vehicle
Support Stands. Personnel involved in the use and operation of equipment
shall be careful, competent, trained, and qualified in the safe operation of
the equipment and its proper use when servicing motor vehicles and their
components. Warning information should be emphasized and understood.
If the operator is not fluent in English, the manufacturer's instructions and
warnings shall be read to and discussed with the operator in the operator's
native language by the purchaser/owner, making sure that the operator
comprehends its contents.
Owner and/or user must study and maintain for future reference the
manufacturer's instructions and pertinent warning information. Owner and/or
user is responsible for keeping all warning labels and instruction manuals
legible and intact. Replacement labels and literature are available from the
manufacturer.
WARRANTY
Matco® shop equipment and tools, excluding accessories, are warranted
against defects in materials or workmanship for a period of 1 year from
original purchase. We will repair or replace at our option any defective part
or unit which proves to be defective in material or workmanship within this
warranty plan. This warranty does not cover damage to equipment or tools
arising from alteration, abuse or misuse, and does not cover any repairs or
replacement made by anyone other than Matco or its authorized service
centers.
The foregoing obligation is Matco Tools sole liability under this or any implied
warranty and under no circumstances shall we be liable for any incidental or
consequential damages.
NOTE: Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply
to you.
MJS7T
MJS7T 7 Ton Pin Jack Stand (Pair)
NOTE: When using jack stands for body shop work such as straightening
of frame and/or body of vehicle, use caster wheel type jack stand dollies
to prevent load from being pulled off jack stands. When removing stands,
carefully raise vehicle enough to clear the stands, making sure the vehicle
remains stable. Remove stands, being careful not to crawl under vehicle
while doing so. Carefully lower vehicle to floor.
MAINTENANCE INSTRUCTIONS:
Always check if the post saddle moves freely through the base and continues
to work properly.
INSPECTION
Visual inspection should be made before each use of the stand. Any stand
which appears to be damaged in any way, found to be badly worn, or
operates abnormally, MUST BE REMOVED FROM SERVICE. If the stand is
accidentally subjected to an abnormal load or shock, it must be inspected by a
manufacturer's authorized repair facility immediately. It is recommended that
an annual inspection of the stand be made by a manufacturer's authorized
repair facility and that any defective parts, decals, or warning labels be
replaced with manufacturer's specified parts. A list of authorized repair
facilities is available from the manufacturer.
Return equipment or parts to Matco Tools, transportation prepaid. Be certain
to include your name and address, evidence of the purchase date, and
description of the suspected defect.
If you have any questions about warranty service, please write to Matco Tools,
Stow, OH 44224. This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.
06/06/07
Advertisement
