Table of Contents
Advertisement
Error Message Chart
Follow suggested procedures for the error indicated on the host machine (printer).
Cause of Error
The top cover is open.
*1
The conveyor is full.
The trim box is full.
A booklet jam has occurred at the
entrance of the
two-knife trim section.
A booklet jam has occurred
knife trim section.
A booklet jam has occurred at the exit of
the
two-knife trim section.
*1
If this error message appears when the conveyor is not full, trim may be blocking the sensor.
E
3
Close the top cover
Lift the
veyor.
Empty it. If there is trim left in the delivery chute, remove
the trim.
Open the delivery section cover
mer and the top cover
mer-A1. Open the
remove the jammed booklet. Reposition the
F2 transport unit and close the top cover
delivery section cover
in the two-
Open the top cover
A1. Open the
jammed booklet. Reposition the
close the top cover
Open the top cover
A1. Open the
jammed booklet. If necessary, also hold the
and lift the conveyor. Reposition the
port unit and close the top cover
F2
1
2
Remedy
.
1
E handle and remove the booklets from the con-
2
of the two-knife booklet trim-
1
A and
F2 transport unit, and
to restart printing.
2
of the two-knife booklet trimmer-
1
F2 transport unit and remove the
to restart printing.
1
of the two-knife booklet trimmer-
1
F2 transport unit and remove the
1
A
of the upstream trim-
A and
1
and the
F2 transport unit and
E handle
E and
F2 trans-
to restart printing.
Error Messages
3-3
Advertisement
Table of Contents
