Page 1
MYLAPS.COM RACELINK GPS CHARGER CASE QUICK START GUIDE...
Page 2
RaceLink GPS won’t emit any signals and the battery won’t drain Place the X2 RaceLink GPS in one of the designated places in the charger case. Once connected, the LED on the X2 RaceLink GPS will show the charge indication. The LED will remain on as long as the X2 RaceLink GPS Charger Case is connected to power.
Page 3
LED INDICATION WHILE CHARGING LED INDICATION CHARGING STATE CHARGING GREEN FULL CHARGE BLUE BLINKING BLUETOOTH LOW ENERGY MODE (4.5-6VDC FIRST 3 MINUTES) BLUE SOLID BLUETOOTH CONNECTION ESTABLISHED WHILE USED ON THE TRACK BLINKS 2 TIMES First blink indicates GPS reception ...
Page 4
<4 ft CAR & KART <60 cm <2 ft <30 cm <1 ft SPECIFICATIONS X2 RACELINK GPS DIMENSIONS 75 x 50 x 23 mm/2.95 x 1.97 x 0.9 in SENSITIVITY -167 dBm, 72 channels WEIGHT 115 g / 0.25 lbs...
Need help?
Do you have a question about the X2 RACELINK GPS and is the answer not in the manual?
Questions and answers