Advertisement
Quick Links
Full HD Wi-Fi Camera
Quick Installation Guide
What's in the Box
Full HD Wi-Fi Camera
MicroUSB Power Adapter
(DCS-8300LHV2)
Mounting Hardware
Quick Installation Guide
DCS-8300LHV2
Simple Setup
Note: Please set up your device before mounting it.
Get the mydlink app on the App
1
Store or on Google Play. Launch the
app, then Sign In or Create a New
Account.
Power on the device and wait for
2
the Status LED to flash orange.
Note: Make sure that your mobile device's
Bluetooth is on.
Place your device next to your
3
mobile device. A prompt will appear
- tap Add Device, then follow the
app instructions.
Note: If not automatically prompted
within 30 seconds, tap
Add Device.
LED Behavior
Connected to network and mydlink
mydlink
Booting up
Ready for setup
Firmware being updated - do not power off
Setup Code
This is a backup of your device' s
Setup Code. Please keep it as future
reference for your device.
then tap
Status LED
Advertisement
Related Manuals for MYDLINK DCS-8300LHV2
Summary of Contents for MYDLINK DCS-8300LHV2
- Page 1 Full HD Wi-Fi Camera Note: Please set up your device before mounting it. Status LED Get the mydlink app on the App Quick Installation Guide Store or on Google Play. Launch the app, then Sign In or Create a New Account.
- Page 2 The microSD card must be formatted into the correct file system (FAT32) before it can be used with this product. This can be done in the mydlink app by selecting the Format function in the storage menu under the device settings.
Need help?
Do you have a question about the DCS-8300LHV2 and is the answer not in the manual?
Questions and answers