Advertisement
Before getting started it is recommended to locate an installation spot on your
motorcycle that will allow you to see the screen of the receiver and operate the unit
safely while driving. Scan the QR code to for additional resources and support.
BACK PLATE ASSEMBLY
Step 1 - Locate the bag containing the parts shown below.
Dual Male AMPS Plate
Step 2 - Place the parts as pictured below. Take the AMPS Socket Plate and place it on one side of the
L-bracket. Next place the Dual Male AMPS Plate on the opposite side as the AMPS Socket Plate and line up
the screw holes. Please note the positioning of the Dual Male AMPS Plate with the notches at the top. The
dual notches must be positioned at the top in order to properly seat into the back of the case. Use the sup-
plied screws and nuts to secure the plates to the L-bracket. Note: The mount can be assembled with the top
plate of the L-bracket facing forward or backwards to fit your installation needs.
Optional - RAM Mount Assembly
To install the kit onto a RAM mount use the RAM Mount Adapter Plate. Locate the RAM Mount Adapter
Plate in the bag with the parts shown below. Screw the RAM Mount Adapter Plate to the L-bracket with
the Dual Male AMPS Plate on one side and the RAM Mount Adapter Plate on the other side.
Satellite Radio Superstore | (800) 513-8554 | www.SatelliteRadioSuperstore.com | contactus@SatelliteRadioSuperstore.com
AMPS Socket Plate with Lock Ring
RAM Mount Adapter
Satellite Radio Compact Motorcycle Kit
Installation Instructions - SXMLCR72
Metal L-bracket
Advertisement
Table of Contents
Summary of Contents for SRS Labs SXMLCR72
- Page 1 Satellite Radio Compact Motorcycle Kit Installation Instructions - SXMLCR72 Before getting started it is recommended to locate an installation spot on your motorcycle that will allow you to see the screen of the receiver and operate the unit safely while driving. Scan the QR code to for additional resources and support.
- Page 2 Step 3 - Install Mount & Attach to Base To install the handlebar mount first loosen the two screws on the handlebar clamp mount all the way out and separate it from the back side of the clamp mount. Place the clamp mount on the handlebars and line up the screw holes and tighten the screws to mount the clamp.
Need help?
Do you have a question about the SXMLCR72 and is the answer not in the manual?
Questions and answers