Table of Contents
Advertisement
2.4 M.2 WiFi/BT Module Installation
The M.2 key E socket supports type 2230 wireless (WiFi/BT) module. Note that this M.2 socket
does not support SATA M.2 SSD.
1. Prepare a type 2230 wireless module and a screw.
2. Gently insert the wireless module into the M.2 slot. Please be aware that the M.2 SSD
module only fits in one orientation.
3. Tighten the screw to secure the module into place. Please do not overtighten the screw as
this might damage the module.
4. Connect one end of the RF cables to the module and the other end to the Antenna ports on
the rear panel of the system.
5. Connect the wireless Antenna to the Antenna ports on the rear panel of the system.
7
eIVP-CML-AI-D0000 AI Box
Advertisement
Table of Contents
