Napoleon FPWI3 Installation Instructions

1
TEMPLATE
(Once all the fi nishing facing material has been installed).
Remove the screws and template, and discard.
3
Install hardware as illustrated.
NOTE: Doors may need to be adjusted to ensure
a good seal around fi rebox.
LEFT DOOR ASSEMBLY
** The fi nal angle of the left door handle should mirror the right
door handle in the closed position. Tighten the nut to secure
the handle at the desired angle.
FPWI3 FACEPLATE KIT & H336-WI DOOR KIT
INSTALLATION INSTRUCTIONS
LOCK WASHER
2
2
**
X 2
**
**
AIR
CONTROL
SLOT
FRONT ARCHED
PANEL
1. Assemble the air control arm by removing the 2nd screw,
rotating the arm in line and re-installing the screw.
2. Install the ash lip.
3. Install the faceplate, ensure the air control arm fi ts through
the air control slot and operates smoothly.
RIGHT DOOR ASSEMBLY
W415-0696 / B / 10.18.11
ASH LIP X 3
NOTE: The faceplate
is shipped with the
upper and lower grills
assembled. Remove
X 7 both grills before
proceeding.
ADJUSTMENT
HANDLE PIN
(FLAT SIDE OF "D"
SHAPE INWARDS)
Do not over tighten.
Handle must rotate
freely.
ADJUSTMENT
FLAT
WASHER
DOOR