PurePro PRO3710 Installation

PRO3710 and PRO3710BN PRO3710 and PRO3710BN
PRO3710-WB and PRO3710BN-WB
Available in Polished Chrome and Brushed Nickel. Available in Polished Chrome and Brushed Nickel.

Warning and Notes:

Warning and Notes:
Cover your drain to avoid losing parts. Check with local plumbing code requirements before installation. The fittings should be installed by Cover your drain to avoid losing parts. Check with local plumbing code requirements before installation. The fittings should
a licensed plumber. When installing flexible hose, there should be no torsion or deformation; DO NOT fold into V or L shape; DO NOT a licensed plumber. When installing flexible hose, there should be no torsion or deformation; DO NOT fold into V or L shap
use if there are any cracks or deformations. use if there are any cracks or deformations.

Installation Steps:

Installation Steps:
Single Handle Pull-Down Kitchen Faucet Single Handle Pull-Down Kitchen Faucet
1 1/4"~ 1 1/2"
( 32mm~ 38mm)
2 7/8"Max
(73mm)Max
1 1/4"~ 1 1/2"
( 32mm~ 38mm)
1 1/2"Max
(63mm)Max

Tools:

Philips Screwdriver
Adjustable wrench
Pliers

Cleaning:

To maintain and protect the fine luster of all products, clean with a soft damp cloth only.
DO NOT USE harsh chemicals or cleaners as they may harm the protective finish.
1. Turn off water supply. Remove existing 1. Turn off water supply. Remove existing
faucet if necessary.
Remove preassembled mounting
hardware from faucet.
2. Without deck plate installation: Install 2. Without deck plate installation: Install
faucet body through top of sink
(not included).
1 1/4"~ 1 1/2"
( 32mm~ 38mm)
2 7/8"Max
(73mm)Max
3. With deck plate installation: 3. With deck plate installation:
Place a bead of clear silicone sealant
(not included) around the base of the
putty plate. Place putty plate and deck
plate on sink (not included).
1 1/4"~ 1 1/2"
( 32mm~ 38mm)
Insert faucet body through deck plate.
1 1/2"Max
(63mm)Max
4. Slide rubber washer and metal washer 4. Slide rubber washer and metal washer
onto shank of faucet body. Secure
faucet body to sink with lock nut and
preassembled screws.
Tools:
Philips Screwdriver
Adjustable wrench
Pliers
Cleaning:
To maintain and protect the fine luster of all products, clean with a soft damp cloth only.
DO NOT USE harsh chemicals or cleaners as they may harm the protective finish.
faucet if necessary.
Remove preassembled mounting
hardware from faucet.
5. Before connecting hose adaptor, please remove the cap first. Attach
lower end of spray hose to central supply tube in facuet.
A. Push quick connect hose assembly firmly upward until unable to
push any further. You will hear a clear "CLICK" sound.
B. Pull down on quick connect hose assembly, if you can not pull off,
then quick connect hose assembly is secure.
faucet body through top of sink
C. To remove the quick connect hose assembly, push quick connect
(not included).
hose assembly upward, then press the clip and housing together to
pull down at the same time.
Place a bead of clear silicone sealant
(not included) around the base of the
putty plate. Place putty plate and deck
plate on sink (not included).
Insert faucet body through deck plate.
onto shank of faucet body. Secure
faucet body to sink with lock nut and
preassembled screws.
1
Silicone sealant Silicone sealant
Hex wrench Hex wrench
Pipe tape Pipe tape
5. Before connecting hose adaptor, please remove the
lower end of spray hose to central supply tube in fac
A. Push quick connect hose assembly firmly upward u
push any further. You will hear a clear "CLICK" soun
B. Pull down on quick connect hose assembly, if you c
then quick connect hose assembly is secure.
C. To remove the quick connect hose assembly, push q
hose assembly upward, then press the clip and hou
pull down at the same time.
6. Attach the weight to cover the
weight locator label on the spray
hose. Use a Philips Screwdriver
(not included) to secure.
7. Attached water supply lines to the
faucet water supply tubes.
8. Remove spray head from Hose line.
Turn on water to flush out air/debris
when the water is clear and air is
purged turn off water at handle,
re-install spray head, turn back on
for 15 seconds and inspect for
leaks. (You need the spray head on
to create backpressure in the hose
to check for leaks.)
®
6. Attach the weig
weight locator
hose. Use a Ph
(not included) t
7. Attached water
faucet water su
8. Remove spray
Turn on water t
when the water
purged turn off
re-install spray
for 15 seconds
leaks. (You nee
to create backp
to check for lea
© 2021
Made in China