Advertisement
Main parts
№
Name
1
Burner
2
Gas knob
3
Handle
4
Trigger
Assembly
1. Screw the burner and extension tube together. Tighten the connection with the wrench.
2. Connect the flexible hose connection with the handle and the other hose connection with the
pressure reducer.
3. After connecting the gas cylinder, make sure that its valve is closed.
4. Make sure that all gaskets are present and undamaged. Replace them if necessary.
5. Connect the device to the gas cylinder with the help of the valve and tighten the pressure re-
ducer nut with the wrench.
6. Before use, re-check all gaskets.
Operation
1. Open the valve head of the gas cylinder.
2. Slightly turn the gas knob at the handle counter-clockwise.
3. Immediately ignite the gas next to the burner with a match or lighter.
Attention!
Should you not manage to ignite the flame several times, close the valve and wait
for the gas escaped to have dissipated before you re-try to ignite the flame.
4. Regulate the burning power with the help of the trigger.
5. If you wish to extinguish the flame, close the gas cylinder valve and wait for to flame to go out.
After that, close the gas knob at the handle.
Attention!
Never operate the device if gaskets are damaged or missing. Only check gaskets
outdoors and with the help of leak spray or soapy water. Never search leaks with a flame.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
№
Name
5
Handle connection
6
Cylinder connection
7
Hose
8
Wrench
Item 61288
Page 5
11
2021-1
Advertisement
