Table of Contents
Advertisement
5.MACHINE OPERATION EXPLAIN.
Check the right power source with the name plate of the machine. Plug in the power and
ready to operate the machine.
Turn on main power switch and set the value on control panel. After finish all of the
setting push down the safety bar and press "Start/Pause" button to start the function.
Safety function will be effective and machine will stop at the same time while user
pull up the safety bar or gear motor box during working process.
After vacuum tumbling job finish, machine will stop and air ventilation at the same time.
As soon as machine finish air ventilation, open the vacuum cover and use unloading
switch to unload the product in drum.
The stopper on the side of the machine is design to hold the drum and remain it in the
same angle and help user to load in the processing product. How to use the stopper:
A. Push in the handle bar of stopper to the hole of the drum before load in the
processing product.
B. Pull back the handle bar of stopper from the hole of the drum before start the
machine.
Warning: The handle bar of the stopper must be pulled back before user start the
machine!! The machine will be damaged if user have not fulfill it!!
3
Advertisement
Table of Contents
