Table of Contents
Advertisement
Item
Mode name
RAM Drive Last Error
RAM Drive error code display.
*For details about the drive error code, refer
to the Service Manual for the specific RAM
Drive.
Delete the Last Drive
Delete the Last Drive Error information
Error
stored on the DVD RAM-Drive.
Laser power confirmation Drive state is judged based on difference
between laser power value at shipping and
present laser power value.
Turn on all FL/LEDs
All segments of FL and all LEDs are turned
on.
PB HIGH Signal Output
8 pin of AV 1 Jack (PB HIGH terminal) is
High (approx. 11V DC).
PB MIDDLE Signal
8 pin of AV 1 Jack (PB HIGH terminal) is
Output
Middle (approx. 5.5V DC)
All manuals and user guides at all-guides.com
Description
1. Error Number is displayed for 5
seconds.
2. Time when the error has
occurred is displayed for 5
seconds.
DD: Day
hh: Hour
mm: Minute
3. Last Drive Error (1/2) is
displayed for 5 seconds.
4. Last Drive Error (2/2) is
displayed for 5 seconds.
5. Error occurring Disc type is
displayed for 5 seconds.
6. Disc Maker ID is displayed for 5
seconds.
7. Factor of Drive Error occurring is
left displayed
If DVD-RAM disc in not inserted,
[NO DISC] is displayed.
If power value study was filed,
[ERROR] is displayed.
All segments are turned on.
21
FL display
(Remote controller key)
Press [4] [2] in service mode.
When "INFO******" is being
displayed, past 19 error histories
can be displayed by pressing [0]
[1] - [1] [9]
In case that the maker cannot be
identified, display is black out.
Press [9] [6] in service mode.
1. Insert DVD-RAM disc
into RAM Drive in service
mode. (Other media are
assumed to be non-
correspondence.)
2. Press [4] [4].
Press [5] [1] in service mode.
Press [5] [2] in service mode.
Press [5] [3] in service mode.
DMR-EZ45VEB
Key operation
Advertisement
Table of Contents
