Page 1
Outdoor Wicker Float Storage Bin ITEM # 90140 OWNER’S MANUAL AND SAFETY INSTRUCTIONS SAVE THIS MANUAL. KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY, OPERATION, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S SERIAL NUMBER ON THE BACK OF THE MANUAL, OR THE MONTH AND YEAR OF PURCHASE IF PRODUCT HAS NO SERIAL NUMBER FOR QUESTIONS, PLEASE CALL CUSTOMER SERVICE: 909.628.0880...
Page 2
PART LIST Back Panel Bottom Panel Side Panel Front Panel Bottom Frame 1 PC 1 PC 2 PCS 1 PC 1 PC Divider Swivel Caster Locking Caster 2 PCS 2 PCS 2 PCS HARDWARE LIST M6*15mm M6*40mm M6mm M6mm Short Bolt Long Bolt Washer Allen Key...
Page 3
Step 1. Lay back panel (part #A) down on a flat surface.Attach bottom panel(part #B) to back panel(part #A) using the long bolts(part #2), washers(part #3) & allen key (part #4). NOTE: Please do not fully tighten bolts until unit is fully assembled.
Page 4
Attach front panel (part #D) to assembled parts (part #A,B&C) Step 3. using long bolts (part #2), washers (part #3) & allen key (part #4). Step 4. Attach bottom frame (part #E) to assembled parts (part #A,B,C&D) using the long bolts (part #2), washers (part #3) & allen key (part #4).
Page 5
Step 5. Attach swivel caster (part #G) and locking caster (part #H) to bottom frame (part #E). Step 6. Carefully turn the cabinet over so the casters are on the floor. Attach dividers (part #F) to bottom frame (part #E) using short bolts (part #1), washers (part #3) &...
Page 6
DISCLAIMER OF NOTE PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
Need help?
Do you have a question about the 90140 and is the answer not in the manual?
Questions and answers